Publicidad
Idiomas disponibles
Idiomas disponibles
TO REMOVE CLOG FROM HOSE
1. Rotate the extension
hose release lever
counter-clockwise
to release extension
hose.
Extension
Hose
Wand
Wand
Extension Hose
Release
Nozzle
Hose
2. Remove the lower end of the extension
hose from the wand holder
by grasping
the hose collar, twisting,
and pulling
straight
up.
3. Plug in the vacuum
cleaner
and turn it
on,
4. Stretch
the extension
hose to maximum
length and then allow the hose to return
to its natural
length.
Hose
Storage
Position
t
1
t
t
I
I
I
I
6. Rotate hose release lever clockwise
to
the locked position.
WARNING
Personal
Injury Hazard
DO NOT place hands or feet under-
neath the vacuum
cleaner at any
time.
If the dust bag, filter areas and the hose
areas are free of clogs, disconnect
the
nozzle hose from the wand
holder and
check the nozzle for clogging.
Clean the agitator
according
to the
instructions in the AGITATOR
CLEANING
section,
Return the vacuum cleaner to the upright
position before
plugging
into an electrical
outlet.
5. Re-insert the hose into the original
storage position
from which
it was
removed,
Press firmly to assure
connection.
2O
Publicidad
