Publicidad
Idiomas disponibles
Idiomas disponibles
Review this table
to find do-it-yourself
solutions
for minor performance
problems. Any
service
needed, other than maintenance
described
in this Use & Care Guide, should be
_erformed
by a Sears or other qualified
service agent.
WARNING
Disconnect electrical supply before performing maintenance
1o the vacuum cleaner.
Failure to do so could result m electrical shock or personal injury.
Vacuum cleaner
wonWt
run.
Poorjob of dirt
1_
pick-up.
2.
Vacuum cleaner picks
up moveable rugs or
pushestoo hard.
Agitator does not
turn.
I, Unplugged at vail outlet.
2. Tripped circuit breaker/blown
fus_
at household service panel,
3. Thermal protector
tripped,
4. Defective wall outlet,
3_
4.
Ful! or clogged dust bag.
Wrong pile height setting.
W'orn agitator.
Clogged nozzle or bag holder_
5. Clogged hose,
6. Hole in hose_
7. Hose not inserted fulty_
8o Motor protection system
activated°
9o Dirty filters.
1. Handle in full upright position°
2. Agitator overload tripped_
3_ Thermal protector tripped.
1. Plug in firmly, select the
desired setting on the touch
contmL
2. Resetcircuit breaker or replace
fuse.
3o Allow vacuum cleaner to cool
40-50 minutes.
4o Check wffh a good appliance or
lamp. Have outlet properly
serviced.
1, Change bag°
2° Adjust setting°
3o Replace agitator.
4. See CLOG REMOVAL
sectionof this Use & Care Guide.
5, Check for clogs_
6. Replace hose.
7. Insert base fully.
8. Check for clogs.
9. Clean or change motor
safety filter and exhaust filter.
Wrong pile height setting.
1_ Adjust setting_
1. Move handle from upright
position.
2. Reset agitator overload protector_
3. Allow vacuum cleaner to cool
40.50 minutes,
Airflow restricted
1. Attachment use restrictsair flow.
I. Check attachements for fuzz,
with attachment use;
lint, pet hair or other debris.
sound changes.
2. New carpet fuzz clogged air path 2. Clean out hose. See CLOG
REMOVAL sectionof this Use &
Care Guide.
Vacuum Cleaner Help Line:
1-877-531-7321
8:00am-5:00pm
EST, M-F
(UoS.Ao and Canada)
21
Publicidad
