Publicidad
Idiomas disponibles
Idiomas disponibles
e Congratulations on your purchase of the ONKYO EQ-140 Graphic Equalizer.
@ Please
read this manual thoroughly before making connections and turning power on.
@ Following
the instructions in this manual will enable you to obtain optimum performance and listening
enjoyment from your new EQ-140.
@ Please retain this manual for future reference.
Features
® 7 independent frequency bands on both channels.
To provide maximum flexibility in adapting response to any listening room and any type of music, the EQ-140 has seven pairs of level
controls with center frequencies ranging from 63Hz to 16kHz.
@ LED indicators provided for each frequency bands.
Each level control has its own green LED indicator so that the current response setting can be easily checked, even from a distance.
This helps you make smooth and accurate level adjustments in the frequency band.
@ The Equalizer Bypass switch
When equalization is off, the unaltered signal level is shown instead.
Doing this will in no way diminish the quality of sound output
from the amplifier.
Important safeguards
ES
a
SS
"WARNING"
"TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE."
CAUTION
"TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL."
®
For models having power cord with a polarized plug.
CAUTION: To PREVENT ELECTRIC SHOCK.
DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
FOR POWER
CORDS WITHOUT
PLUGS
@
Replacement and mounting of an AC plug on the power supply
cord of this unit should. be performed only by qualified service
personnel.
@
IMPORTANT: The wires in the mains lead are coloured in ac-
cordance with the following code:
Blue:
Neutral
Brown:
Live
As the colours of the wires in the mains lead of this apparatus may
not correspond with the coloured markings identifying the terminals
in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal
which is marked with the letter L or coloured red.
Observe the following precautions to obtain troublefree perform-
ance for many years.
1. Avoid places subject to direct sunlight or extremely high or low
temperatures.
2. Avoid damp or dusty places and places directly affected by
vibrations from the speakers. In particular, avoid placing the
unit on or above one of the speakers.
3. Avoid unstable locations and high places from which the unit
could fall.
4. Ventilation — The unit should be situated so that its location
or position does not interfere with proper ventilation. For ex-
ample, the unit should not be placed on a bed, sofa, rug of
similar surface that could block the ventilation openings or
placed in a built-in installation, such as a bookcase or cabinet,
that could impede the flow of air through the ventilation
openings.
5. Heat — The unit should be situated away from heat sources
such as radiators, heat registers, or other appliances (including
amplifiers) that produce heat.
6. Cleaning of the internal parts should be performed only by
qualified service personnel.
7. Spillage — Care should be taken so that objects do not fall and
liquids are not spilled into the enclosure through the openings.
8. Damage Requiring Service — The unit should be serviced by
qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen or liquid has been spilled into the unit;
or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally or exhibits a
marked change in performance; or
E. The unit has been dropped or the enclosure damaged.
9. Servicing — The user should not attempt to service the unit
beyond that described in the operating instructions. All other
servicing should be referred to qualified service personnel.
@ This apparatus complies with requirements of EEC directive
82/499/EEC.
@ The serial number is written on the rear panel of this unit. Copy
the serial number and 'model number onto your warranty card
and keep it in a safe place.
@
From time to time you should wipe off the front and rear panels
and the cabinet with a silicon or other soft cloth. For heavier
dirt, dampen a soft cloth in a weak solution of mild detergent
and water, wring it out dry, and wipe off the dirt. Following
this, dry immediately with a clean cloth. Do not use rough
material, thinners, alcohol or other chemical solvents or cloths
since these could damage the finish or remove the panel lettering.
WARNING
BEFORE TURNING ON POWER FOR THE FIRST TIME, READ THE
FOLLOWING SECTION CAREFULLY.
@
Some models are designed for use only with the power supply
voltage of the region where they are sold.
European models:
AC220V, 50Hz
Canadian models:
AC120V, 60Hz
British & Australian models:
AC 240V, 50Hz
Worldwide models:
AC120V and 220V
switchable, 50/60Hz
Voltage Selector (Rear Panel)
Worldwide models are equipped with a voltage selector to conform
with local power supplies. Be sure to set this switch to match the
voltage of the power supply in your area before turning the power
switch on. Voltage is changed by sliding the groove in the switch
with a screwdriver to the right or jeft. Confirm that the switch has
been moved ali the way to the right or left before turning the power
switch on. Models without a voltage selector can only be used in
areas where the power supply is the same as that of the unit.
220V
120V
at AC220V
220V™\
120V™
at AC120V
Publicidad
