4.Use and Operation Instruction
4.3.
Startup & shutdown
Notes:
Startup & shutdown operation can only be conducted in the main interface.
When it displays with half screen off or full screen off, click any key for returning to ON/OFF
main interface.
When the unit is started under the control of wire controller, if using the emergency switch to
shut down, the wire controller will display as follows:
Operations are the same as under ON/OFF main interface.
4.4. Mode switch
Under the main interface, Short press"
automatic mode.
Keep long press of "
to enter ON/OFF interface
When there is no operation
within 15 minutes, it will
display with full screen off
"to switch the unit among heating, cooling and
17
"for 0.5 s
When there is no operation
within 1 minute, it will display
with half screen off