Publicidad
Idiomas disponibles
Idiomas disponibles
Care and Cleaning
Cleaning the Outside
DO USE
Soft, clean cloth or sponge
NOTE: DO NOT allow stainless steel cleaner to come in contact with any plastic parts such as
trim pieces, handle hardware and liners. If unintentional contact of cleaners with plastic parts
does occur, clean plastic part with a sponge and mild detergent mixed with warm water.
Cleaning the Inside
• To help prevent odors, leave an open box of baking soda in the compartments.
sponge or cloth when cleaning around switches, lights or controls.
quart (1 liter) of water. This both cleans and neutralizes odors. Rinse and wipe dry.
• After cleaning the door gaskets, apply a thin layer of petroleum jelly to the door gaskets at
the hinge side. This helps keep the gaskets from sticking and bending out of shape.
Replacing the Lights
• If this assembly needs to be replaced, call GE Appliances Service at 1.800.432.2737 in the
Preparing for storage
• For long periods of storage between uses, remove food and unplug the cooler. Move the
temperature control dial to the OFF position, and clean the interior with a baking soda
solution of one tablespoon (15 ml) of baking soda to one quart (1 liter) of water. Leave the
doors open.
12
DO NOT USE
• Abrasive cloths, scrubbing sponges, scouring or steel
wool pads
• Abrasive powders, liquids, or sprays,Window sprays,
ammonia, or bleach, Citrus or plant oil based cleaners
Acidic or vinegar based cleaners, Oven cleaners
Alkaline cleaners, Stainless steel cleaners
• Abrasive powders or sprays, Window Sprays or
Ammonia, Citrus or plant oil-based cleaners, Acidic
or vinegar-based cleaners, Oven cleaners, Cleaners
containing acetone (propanone), Any cleaner with
WARNING about plastic contact
49-1000674 Rev. 5
Publicidad
