MUHLER MG-5126 Manual De Uso página 6

USING YOUR GRILL&GRIDDLE
1. Insert the control probe fully into the socket of the hotplate.
2. Plug the cord into a power outlet and turn the power ON.
3. Set the control probe dial to the desired heat setting. When the thermostat light on the control probe switches off, the
desired cooking temperature has been reached and the Grill is ready to use.
NOTE 1 : The thermostat light on the control probe indicates the Grill is heating. This light will remain ON until the set
temperature
has been reached and then will cycle ON and OFF throughout cooking. This will ensure that the Grill always maintains the
selected temperature.
The preheat time will depend on the heat setting selected. If a high heat setting is selected, a longer preheat time is required.
NOTE 2: When barbecuing on high heat settings, the Grill will generate smoke. Selecting a lower setting will reduce smoke.
Adequate ventilation is recommended.
CARE AND CLEANING
Do not leave plastic utensils in contact with hotplate while cooking
Do not use sharp objects or cut food on top of the Grill
When cleaning the non-stick coating do not use metal or other abrasive scourers. After cleaning, dry the Grill thoroughly with a
soft cloth before storing. Always turn the power off and remove the plug from the power point before cleaning.
Remove the control probe from the socket of the Grill.
CONTROL PROBE
If cleaning is necessary, wipe over with a damp cloth.
Do not immerse the control probe in water or any other liquid.
Store the probe carefully in a safe place. Do not knock or drop it as this can damage the probe.
HOTPLATE AND DRIP TRAY
The element in the hotplate is totally sealed,so it is safe to fully immerse in water. Wash the hotplate and drip tray in
warm soapy water using a mild household detergent and a soft washing sponge.
STORAGE
Always dry the Grill before storing. Ensure the drip tray is correctly positioned.
Store the Grill on a flat surface on your bench top or cupboard.
Important : Before inserting control probe in probe socket, ensure the interior of the socket is fully dry. To do this, wipe interior
of socket with a dry cloth or shake out excess water vigorously.
6
EN: ELECTRIC GRILL | Instruction Manual