Oakcastle F300 Manual Del Usuario página 9

Basic Operation
EN
Please note that the instructions in this manual will refer to the phone
buttons number e.g. (Ref.*number*) in accordance with the diagrams on
page numbers 4 and 5.
Charging
Using the USB–C cable received in the box, insert the Micro-USB
end into the phone and the other end to an USB power supply.
Once fully charged, the screen will display 'Charging Complete',
indicating that the phone is now ready for use.
The total charging time is 1.5 hours.
Power On / Off
To power ON/OFF the phone, press and hold down the ON/OFF
button (Ref.9), for 4 seconds.
Lock/Unlock
The Oakcastle F300 has an automatic 'Lock function', which
activate within a few seconds of no use. To unlock/lock the
phone, press 'Left soft key' button (Ref.4) followed by '*' key
button (Ref.7).
Make a call
To make a call, begin dialling a number using the keypad (Ref.6)
from the home screen, and then press the 'Send Call' button
(Ref.5) to call the number. Alternatively, select a contact from
your Contacts list and then press the 'Send Call / Answer Call'
button (Ref.5).
To save a phone number via keypad, type the number using your
phone keypad, and then save to your 'Contacts' list. To edit the
name, press the' UP' arrow button to edit then use the phone
keypad numbers with corresponding letters on it to type your
message.
9