Bayrol smart&easy CONTROL MODULE Instrucciones De Uso página 28

5.4 Pool Lighting (Underwater Light)
When installing a 12 V pool lighting, a transformer is required, which can be installed according to the following figure.
230V AC + RCS (≤ 30 mA)
1
5.5. Other (pool) equipment
In addition to the installations already mentioned, you have the option of using the Smart&Easy Control Module
to switch other 230 V-operated devices, such as the outdoor lighting. This function is called the universal switching
function and is generally connected as follows:
230V AC + RCD (≤ 30 mA)
1
2
28
4
3
2
3
1
Circuit breaker
2
Transformer for pool lighting
3
Pool Lighting
4
OUT 1 – 4
Hint
– The transformer must be designed according to the
pool lighting to be connected.
– A 230 V AC control, e.g. for ambient lighting, is
shown in point 5.5.
1
Circuit breaker
2 Device / Other (pool) equipment
3
OUT 1 – 4
Hint
For the switching large electrical loads, such as pumps
or fans, a power contactor must be used to separate
the control and main circuits. (analogous to point 5.1.
Single-stage filter pump)