Publicidad
Idiomas disponibles
Idiomas disponibles
Ermenrich Seek DS20 Digital Sound Level Meter
EN
Please carefully read the safety instructions and the user manual before using this product. Keep away from children. Use the device
only as specified in the user manual.
The kit includes: digital sound level meter, pouch, user manual, and warranty card.
Getting started
•
Unscrew the screw on the back of the sound level meter, remove the battery compartment cover, and insert 3 AAA batteries. Close the
cover and screw in the screw.
•
Press the Power button and hold it for two seconds to turn on the device.
•
Press the Power button to turn off the device
Display information
1
2
3
17
16
15
14
13
12
1
Automatic shutdown mode
2
Data hold mode
3
Maximum value mode
4
Minimum value mode
5
Low battery indicator
6
Relative humidity unit (percentage)
7
Relative humidity value
8
Slow time weighting
9
A-weighted value
10
C-weighted value
11
Sound level unit (decibels)
12
Sound level value
13
Sound level scale
14
Fast time weighting
15
Temperature unit (degrees Celsius)
16
Temperature value
17
Temperature unit (degrees Fahrenheit)
Operation
During the measurement, keep the microphone faced towards the noise source. Wind blowing across the microphone may distort the
measurement results. Cover the microphone with the windscreen (included) when in operation. The value of the noise measurement is
shown in the field [12] on the display and on the graphical scale [13].
When the unit is not in use, cover the microphone with a protective cover and pack the unit in a special pouch (cover and pouch included).
Automatic shutdown function
The sound meter automatically turns off after 10 minutes from the last action. The automatic shutdown icon [1] on the display indicates that
this mode is currently active.
4
5
6
7
8
9
10
11
3
Publicidad
