Arctic King WWK05CM81N Manual Del Usuario página 17

NOTE
Save carton and these Installation Instructions for future reference. The carton is the
best way to store unit during winter, or when not in use.
1. PREPARE THE WINDOW
Lower sash must open sufficiently to allow a clear vertical opening (see dimension
H in Table 1). Side louvers and the rear of the AC must have clear air space to allow
enough airflow through the condenser for heat removal. The rear of the unit must be
outdoors, not inside a building or garage.
Mounting Hardware
Lock Frame Lock Frame
(For Wooden windows) (For Vinyl-Clad windows)
(2) (2)
Window sash
3/4'' (or 1/2")
Screws seal foam
(1)
(7)
Top Rail Hardware
3/8" Screws Top Rail
(4) (1)
2. PREPARE AIR CONDITIONER
Before installing the unit, the top rail must be assembled on the unit for models with a
capacity of less than 10,000Btu/h.
Packaging
Page 16
CAUTION
When handling unit, be careful to
avoid cuts from sharp metal edges
Sash Lock
and aluminum fins on front and rear
(1)
coils.
R1 Insulation Hardware
(2)
A: Remove the air conditioner from the
Fig. E
carton and place on a flat surface.
B: Remove top rail from the packaging
material as shown in Fig. E.
Top Rail