Publicidad
Idiomas disponibles
Idiomas disponibles
Before connecting cables
1. Unfasten the screws, then open the cover.
2. Remove the appropriate silicone bar for the thickness of
the cable to connect.
1
2
3
4
5
Different hole sizes and corresponding cable thickness for each:
Position
1
2
Cable
diameter
Ф 7.0
Ф 4.0
(Ф mm)
Position
6
7
Cable
diameter
Ф 1.6
Ф 5.5
(Ф mm)
6
7
8
9
3
4
5
Ф 3.0
Ф 3.0
Ф 5.5
8
9
Ф 7.0
Ф 8.0
3. Insert the appropriate cable into the hole from which the
silicone bar was removed.
4. The cable should be connected as shown.
5. Close the cover, then fasten the screws.
– After all the cables are connected, make sure to close
the cover and fasten the screws to ensure it is water
tight. (Use the provided screws. Otherwise, it may
cause problems such as improper Weather-Resistant.)
Recommended torque : 2.5 - 3.5 kgf.cm
English - 7
Publicidad
