Be Cool BC18ST2402 Instrucciones De Uso página 135

Now insert a new CR2025 battery, always paying attention to the polarity
markings (+/-) on the battery and the battery holder.
Then push the battery holder fully back into the remote control.
Note: If you do not use the remote control for a longer period of time (4 weeks or
more), remove the batteries from the remote control.
Functions and operation
Vertical swivel function
Horizontal swivel function
Here are the instructions for using the fan:
•
Insert the plug into the power socket. The unit is in standby mode and the
power indicator lights up.
ON/OFF button:
Press the button to switch the fan on. Press it again to put it in standby mode.
Speed button:
Press the "Speed" key to set the fan speed from 1 to 3. The corresponding
indicator light is switched on or off.
When using the remote control: Press the "SPEED" button to set the fan speed
from 1 to 3. The corresponding indicator light is switched on or off.
Timer
long press to switch the vertical swivel function
135
Speed button
On/off button