Elta RHC-4.6 Manual De Instrucciones página 18

-Use only the cleaning oil or sewing machine oil provided on the blades.
-Do not use harsh or corrosive cleaning agents. Do not immerse the battery
area in water as this may damage it.
STORAGE
-Always keep this device and its cord near a moisture-free place. Do not store it
at temperatures above 60 ° C.
-Do not wrap the charging adapter cable around the device.
IMPORTANT SAFETY INSTRUCTIONS
WARNING TO REDUCE THE RISK OF BURN, ELECTRIC SHOCK, FIRE, OR
PERSONAL INJURY:
-A device should never be left unattended when it is plugged into an electrical
outlet.
-Keep the power plug and cord away from heated surfaces.
-Make sure the power plug and cord do not get wet.
-Do not plug in or unplug the product with wet hands.
-Do not use the product with a damaged cord. A replacement can be obtained
from our service department.
-Load, use and store the product between 15 ° C and 35 ° C.
-Always pull the power plug before cleaning.
-Use only the parts supplied with the device.
-Keep this product out of the reach of children. The use of this device by
persons with limited physical, sensory or mental capabilities or lack of
experience and knowledge can be dangerous. Persons responsible for their
safety should give explicit instructions or monitor the use of the device.
REMOVAL OF THE BATTERY
Use scissors to lift the battery out of the case to disconnect the case from the
power line. (Fig. 32)
The battery must be removed from the device before it is scrapped. The battery
must be disposed safely.
1. Unplug the clipper from the electrical outlet to avoid the risk of electric shock.
2. Remove the back cover by first removing the rubber plate from the product
with a flat-blade screwdriver. Use a screwdriver to pry the on / off switch off the
product. Remove the top case from the device. This will expose the batteries.
3. Use a wire cutter to cut the wires leading to the batteries.
4. Remove the batteries from the product. For proper disposal return to your
local authorities.