DCU Tecnologic 37300830 Manual De Usuario página 15

ENG
3.4.8 In the standby state, double click "Alarm clock 1" or
"Alarm clock 2" button to check the corresponding Alarm
clock time. It will not be displayed if Alarm clock is not
set.
4. Temperature Setting:
By default, the temperature display will be in Fahrenheit,
double press the "+/-"to change the temperature from
Celsius to Fahrenheit or from Fahrenheit to Celsius.
5. Nightlight Setting:
5.1 "Light" button can switch the night light manually in 8
levels of colors: RGB gradient cycling, yellow, light green,
green, light blue, red, blue, purple, and then light off.
5.2 Press and hold the "light" button to turn off the night
light
6. Memory function:
After the power is disconnected, the internal button
battery can be used to memorize the clock setting, and
the clock does not need to be reset after the power is
connected again
Service and warranty:
1. The warranty covers quality problems caused by
manufacturing, materials or design within the first 3 years
of purchase and battery and charger problems within the
first 6 months.
2. The guarantee does not cover damage caused by misuse
of the product or by the following cases:
1). Disassemble or reassemble the product.
15