Mark SUPERLED 144 IP Manual De Instrucciones página 5

To connect more than one unit in a chain, please, follow this picture. The output of the first unit must
provide to the next DMX input of the signal, this way it is possible to send the signal to all the devices in
the chain.
ADVANCED USE
CONTROL PANEL
SUPERLED 144 IP can be configured in different ways thanks to its panel and selection buttons.
Press the MENU button (once or several times) until you get to the
desired function (according to the following chart), and press ENTER
to confirm your selection.
Use the UP & DOWN buttons to navigate between each function to
select the correct value. (Press ENTER to confirm the setting).
4