Publicidad
Idiomas disponibles
Idiomas disponibles
PACKAGE CONTENT
1 x PA4250T / PA4500T
1 x User's manual
SPECIFICATION
Model
Description
Rated Power Output
Rated power at 8 ohms
Frequency Response
Input
Input Impedance
THD
S/N Ratio
Power Consumption
Power Supply
Dimension
Weight
PRODUCT DESCRIPTION
The PD range class D digital power amplifier features minimal power consumption and
much higher efficiency of up to 85%, plus it helps save installation rack space and
generates less heat to extend its lifespan. as a result.
Class D digital amplifiers have a rated output power of 240W/350W/500W (depending on
version) per four channels, so they could be used as a four-zone multi-source public
address system at minimal cost. Versatile 100V high-impedance and 4-ohm low-impe-
dance speaker outputs let you tackle PA fixed installation and high-fidelity stereo sound
installation jobs.
There are four balanced inputs per Euroblock connector for each channel with gain
control. Four separate zone speaker outputs, both 100V and 4-16 ohms. The built-in
four-channel separate high-pass filters can be enabled or disabled via DIP switch
presetting.
Automatic standby mode is enabled after detecting no input signal for one minute, active
when receiving signal on any input. Visual working status indicators include guard, clip,
entry and exit for easy monitoring. With full protection against short circuit, overload,
high temperature, clip and DC.
Wide AC power supply from 115V to 230V, thus supporting equipment installation
anywhere in the world.
www.audibax.com
PA4250T / PA4500T
PA4250T
4 Channel Class-D Power Amplifier
4x240W
4x240W
Bypass 20Hz-20KHz
High pass filter 70Hz-20KHz
0.775V, 0dBu, balanced phoenix connector by four channels
<0.1% (1KHz/-3dBv, 100W)
1100W
AC 100-240V, 50-60Hz
484x420x44 mm
8.8kg
3
PA4500T
4x500W
4x350W
10KΩ
>80dB
2100W
9.8kg
Publicidad
