Publicidad
Idiomas disponibles
Idiomas disponibles
SPEAKER CONNECTION
Before connecting speakers, disconnect the AC power cable. Note the proper
connecting terminals as shown below. Make sure that the total impedance is not less
than the rated impedance indicated.
- Connecting 4-16Ω Speaker Systems
When connecting conventional 4-16Ω speaker systems, connect the speaker's positive
(+) side to the terminal labeled 4-16Ω. Connect the speaker's negative (-) side to the
terminal labeled COM.
- Connecting High-Voltage Distributed Speaker Systems
When connecting a low-impedance (100V) speaker system in parallel, connect the
speaker's positive (+) side to the terminal labeled 100V. Connect the speaker's negative
(-) side to the terminal labeled COM.
FOR 100V SPEAKER WITH
TRANSFORMER CONNECTION
www.audibax.com
FOR 8 ohms LOW IMPEDANCE SPEAKER
CONNECTION
PA4250T / PA4500T
8Ω
WRONG SPEAKER CONNECTION
6
Publicidad
