Publicidad
Idiomas disponibles
Idiomas disponibles
Step 12
Now the camera is configured, and you can enjoy live
streaming.
Step 13
Setting up motion detection and push notifications:
Go to Device manager select the desired camera and press the Config Device icon
-
press Video detect Motion Detection and enable motion detection.
For more information regarding motion detection please refer to the "help menu" chapter
-
"device manager".
-
To receive push notification on your smartphone:
o Go to Alarm manager
button to turn it ON
o Choose the push notification trigger "Motion Detect" and select "IPC"
o Press the back button and press the top right save button
o Check on push configuration that the camera is not displayed as "Close"
Note
To know more about the App, check our Help menu. There you
will find a brief explanation for each App menu.
For troubleshooting go to our FAQ inside the Help menu.
For more information about manuals, firmware versions, etc.,
visit our website or contact your local service support.
http://security.blaupunkt-service.com
Note:
Activating WPS (Wi-Fi Protected Setup)
function on the camera will close the Wi-Fi
configuration.
If the Wi-Fi configuration failed, please try
again or check the Wi-Fi password.
If the camera registration is still not working,
perform a factory reset by pressing the reset
button (see chapter 2) for 15 seconds and try
again.
To learn in a camera to another smartphone,
use the Device card or Network search feature.
For more information refer to the "help
menu".
press Push Config
Select the desired camera and press on the
to save the changes.
6
Publicidad
