Blaupunkt VIO-DP20 Guía Rápida página 9

4. Device Installation
4.1. IMPORTANT – Read before installing

Before the installation, please make sure the installation environment can at least support 8x weight of the
camera.

All installation and operation here should conform to your local electrical safety codes.

Check your Wi-Fi signal strength. To make sure that your camera's connection is as stable as possible, make
sure that the Wi-Fi signal is very strong at the location of your camera. The suggested Internet bandwidth is
1Mbps (upload/download speed).

For best performance, the smart-mobile device(s) need to be on Wi-Fi or 4G mobile network in order to
receive maximum download speed.

Avoid aiming the lens at the strong radiation source directly (such as sun, laser, molten steel etc)

If you desire to install a MicroSD card we recommend doing it before the installation process. Please refer to
"4.4 MicroSD installation" for more information.
Installation Surface
Mounting Map Sticker
Antenna
Enclosure
Inner Hex Wrench
7
Pedestal Seal
Ring
Figure 4-2
U-shape side exit
Plastic Dowel
Dome Pedestal
Pan Rotation Direction
Tilt Rotation Direction
Installation Screw