Descargar Imprimir esta página

SHOWJOE 24V-X2-SB18 Manual Del Operador página 15

Quitanieve inalambrico

Publicidad

Idiomas disponibles

Idiomas disponibles

Fig. 21
Deflector knob
m
WARNING
Make sure that the chute deflector snaps and locks
completely onto the discharge chute. An opening
between the discharge chute and the chute deflector
may allow foreign objects to be picked up by the snow
blower and thrown in the direction of the operator
causing serious bodily injury.
• Do not advance the chute deflector too far forward
causing an opening to appear between the
deflector and discharge chute.
• Do not overtighten the knobs on the chute
deflector.
Maintenance
To order genuine replacement parts or accessories for the
Snow Joe
®
24V-X2-SB18 cordless snow blower, please visit
shopjoe.com or contact the All Season Power customer service
center at 1-866-225-9723.
m
WARNING!
Make sure to turn off the switch and remove
the batteries before performing any maintenance task on your
snow blower.
Lifetime Lubrication (Motor + Auger)
Lubrication is not necessary and may damage the unit.
The snow blower is lubricated for lifetime use at the factory
before shipment.
General Maintenance Tips
1. Do not attempt to repair the machine unless you have the
proper tools and instructions for disassembly and repair of
the machine.
2. Check bolts and screws at frequent intervals for proper
3. After each snow removal session, run the snow blower
Proper Care for Batteries + Charger
m
charger and remove the battery packs from the charger before
performing any maintenance task. Never disassemble the battery
packs or charger. Contact your Snow Joe
the All Season Power customer service center for ALL repairs.
1. To reduce the risk of injury and damage, never immerse
m
2. Clean out dust and debris from charger vents and electrical
3. Use only mild soap on a damp cloth to clean the battery
4. The 24V* IONMAX lithium-ion battery charger has no
Maintenance + Storage
1. Run the machine a few minutes after throwing snow to
2. Examine the cordless snow blower thoroughly for worn,
3. Clean the snow blower before storing or transporting.
4. Remove the batteries from the cordless snow blower before
5. Store the cordless snow blower indoors in a locked,
6. Maintain safety and instruction labels, as necessary.
15
tightness to ensure that the equipment is in safe working
condition.
for a few minutes to prevent the collector/impeller from
freezing. Shut off the motor, wait for all revolving parts to
stop completely, and wipe residual ice and snow off the
unit. Rotate the chute deflector by the chute control crank
several times to remove any excess snow.
WARNING!
To reduce the risk of injury, always unplug the
your battery packs or charger in liquid or allow any liquid to
flow inside these components.
contacts by blowing with compressed air.
packs and charger, keeping away from all electrical
contacts. Certain cleaning agents and solvents are harmful
to plastics and other insulated parts. Some of these
include gasoline, turpentine, lacquer thinner, paint thinner,
chlorinated cleaning solvents, ammonia and household
detergents containing ammonia. Never use flammable or
combustible solvents around battery packs,
battery chargers or tools.
serviceable parts.
prevent the auger from freezing.
loose or damaged parts. Should you need to repair or
replace a part, contact an authorized Snow Joe
Sun Joe
dealer or call the All Season Power customer
®
service center at 1-866-225-9723 for assistance.
Be sure to secure the unit while transporting.
storing.
dry place out of the reach of children to prevent
unauthorized use or damage.
+ Sun Joe
dealer or
®
®
+
®

Publicidad

loading

Este manual también es adecuado para:

24v-x2-sb18-tv1