VEVOR EM4552 Instrucción página 9

Range
EF:< 40V/m
MF:< 0.4µT
RF:< 5mW/m
EF:40 ~ 80V/m
MF:0.4 ~ 0.8µT
RF:5 ~ 10mW/m
EF:> 80V/m
MF:> 0.8µT
RF:> 10mW/m
Note:
1. Whenever any of the EF, MF or RF radiation intensities reaches the
medium level ("
If either EF or MF reaches the medium level, the buzzer will sound.
Similarly, whenever any of the three radiation intensities reaches the
high level ("
the buzzer will sound.
2. Move the tester a little left and right and change the tester's direction,
the tester may changeits radiation intensity indication. The highest
reading displayed during the detection is the most accurate
measurement result.
3. The detection sensor is positioned at the head of the tester. When
making a measurement, you should hold the tester at the rear
section (below the display and the buttons) to avoid hand obstruction
which may affect the measurement results.
Indicator
LED
Green
2
Yellow
2
Red
2
" appears), the yellow indicator LED will light up.
" appears), the red indicator LED will light up and
- 8 -
Buzzer
Symbol
Sound
No
Yes
No
Yes