Buffalo 600 Serie Manual De Instrucciones página 2

EN
Safety Instructions
Warning: Incorrect installation, operation, maintenance or cleaning of the equipment, as
well as any modification can cause property damage and personal casualty. Fully read and
understand all instructions before installation.
• Position on a flat, stable surface.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• Switch off after use.
• Caution! Hot surface!
• DO NOT immerse the appliance in water.
• DO NOT clean with jet/pressure washers.
• DO NOT move or carry the appliance when it is switched on.
• Caution! Never switch on the chip scuttle without foodstuff in
the container.
• ALWAYS ensure to avoid overloading the container. Failure to
do so could result in damage or fire.
• ALWAYS use suitable food ingredients.
• Great care must be taken by the operator when using the
appliance to guard against any risk of fire.
• During and after use, the unit is still hot. Never touch the
surface to avoid scalding.
• Suitable for indoor use only.
2
CU479_ML_A5_v2_20231207.indb 2 2023/12/7 18:28:30