Publicidad
Idiomas disponibles
Idiomas disponibles
Unpacking
Carton Contents
• Electric tiller + cultivator housing
• Upper handle
• Middle handle
• Handle knob and bolt (4)
• Manual
1. Carefully remove the electric tiller + cultivator and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the All Season Power customer service center at
1-866-225-9723.
NOTE: Do not discard the shipping carton and packaging
materials until you are ready to use the electric tiller +
cultivator. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations or save the packaging for long-term
product storage.
IMPORTANT! The equipment and packaging materials are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
Assembly
m
WARNING!
Do not connect to the power supply until
assembly is complete. Failure to comply could result in
accidental starting and serious personal injury.
m
WARNING!
Before performing any maintenance, make
sure the tool is unplugged from the power supply. Failure to
heed this warning could result in serious personal injury.
m
WARNING!
To prevent serious personal injury, make
sure the switch is in the OFF (O) position, the unit is unplugged,
and the tines have come to a complete stop before inspecting,
cleaning, or servicing the unit.
m
WARNING!
The product must be fully assembled before
operation. Do not use a product that is only partially assembled
or assembled with damaged parts.
Follow the assembly instructions step-by-step and use the
pictures provided as a visual guide to easily assemble the
product.
Connecting the Handles
NOTE: Small parts can easily get lost during asembly or when
making adjustments to the machine. To avoid this, secure all
small parts that are removed from the machine and keep them
accessible.
1. Attach the cable clip on the middle handle bar (Fig. 1).
Fig. 1
Cable clip
Middle handle
2. Remove the bolts from the knobs and keep them handy.
3. Secure the middle handle to the lower handle using the first
set of knobs and bolts (A). Tighten the knobs on each side
to ensure a secure fit (Fig. 2).
Fig. 2
Middle handle
Knob + bolt
A
8
Lower
handle
A
Publicidad
