Installation
INSTALLATION AND CONNECTION
1.
This appliance is only intended for domestic use.
2.
This oven is intended for built-in use only. It is not intended for counter-
top use or for use inside a cupboard.
3.
Please observe the special installation instructions.
4.
The appliance can be installed in a 60 cm wide wall-mounted cupboard.
5.
The appliance is fitted with a plug and must only be connected to a
properly installed earthed socket.
6.
The mains voltage must correspond to the voltage specified on the rating
plate.
7.
The socket must be installed and connecting cable must only be replaced
by a qualified electrician. If the plug is no longer to accessible following
installation, an all-pole disconnecting device must be present on the
installation side with a contact gap of at least 3 mm.
8.
Adapters, multi-way strips and extension leads must not be used.
Overloading can result in a risk of fire.
The accessible surface may
be hot during operation.
EN 18