Publicidad
Idiomas disponibles
Idiomas disponibles
EN - Camera Installation
Warning! Ensure the mounting surface supports
1.5 lbs/0.6 kg, 3× the camera's weight.
1.
Use the mounting template to mark and drill
holes for screws and the camera's cable.
Note: To route cables along a wall, use the
camera's cable notch.
2.
Insert anchors for surfaces like drywall, wood,
brick, masonry, or concrete.
3.
Guide the camera's cable through the surface
opening or cable notch.
Important! Wash your hands before handling
the camera.
4.
Connect one end of the Ethernet cable into the
camera's Ethernet connector and the other
end into the NVR's PoE port.
6
Publicidad
