Publicidad
Idiomas disponibles
Idiomas disponibles
5.
Secure the weather-resistant cap by twisting
it onto the camera's Ethernet connector. If
exposed to rain, seal it with silicone or electrical
tape.
6.
Loosen the camera's dome cover screws with
the T10 Torx key, then remove the dome cover
from the camera base.
Important! To prevent moisture or dust from
entering the camera, do not remove the dome
cover in humid or dusty environments and
leave the silica gel pack inside.
7.
Attach the camera base to the surface using
the provided screws and a screwdriver.
Note: When wall mounting, ensure the
camera's microphone is facing downwards.
7
Publicidad
