Bodum BISTRO 11303 Instrucciones De Uso página 9

BEFORE USING THE BLENDER
Clean the blender before using it for the first time. See
CARE AND CLEANING section.
HOW TO USE YOUR BLENDER
– You can store the excess power cord in the cord retainer
(9) on the bottom of the motor base.
– Place the blender jar (3) onto the motor base (4). It must
stand sturdily on the motor base.
– Insert the main plug into an grounded electrical outlet.
MIXING
NOTE: WHILE ANY INDICATION LIGHTS ARE LIT UP OR THE
BLENDER IS IN OPERATION, DO NOT TOUCH BLADES, DO NOT
INTERFERE WITH BLADE MOVEMENTS, DO NOT REMOVE
BLENDER JAR LID OR USE ANY UTENSILS TO DISTRIBUTE
THE FOODS. DO NOT TAKE OFF THE JUG FROM THE BASE
DURING OPERATION.
– The consistency of the mixture is liable to change as
ingredients are added; it may be necessary to increase or
decrease the speed accordingly.
– Only process max. 12 to 14 standard ice cubes at a time.
Use a spatula occasionally to stir ONLY WHEN THE MAIN
BLENDER IS SWITCHED OFF.
– Cool hot foods to max. 80°C / 176°F before blending and
start mixing at
– When mixing at higher speeds (
hot foods, stop the blender before removing the lid cap
to add ingredients.
– Only process max. ½-inch/1.5cm cubes of food.
– Boiling Liquid or solid frozen foods (except for ice cubes)
should not be placed in the blender jar.
– Always let the blender jar cool down which has come
directly from a hot dishwasher before placing ice, frozen
foods or very cold liquids.
IMPORTANT:
TO PREVENT OVERHEATING OF THE MOTOR, SWITCH OFF THE
BLENDER AFTER 2 MINUTES OF CONTINUOUS OPERATION AND
WAIT 5 MINUTES BEFORE CONTINUING. AFTER 5 CYCLES OF
OPERATION, WAIT 15 MINUTES BEFORE CONTINUING.
– Place the ingredients in the blender jar (3). Only fill up to
1.25l/40oz (1.0l/34oz for frothing and hot liquids).
– Place the lid (2) onto the blender jar so the spout is covered
(A: CLOSE ( ) should align with spout) and push it down
and gradually increase to higher speed.
, ), with full jar or with
8