ASROCK 775V88 Manual Del Usuario página 8

Idiomas disponibles

2.1 775-LAND CPU Installation

For the installation of Intel 775-LAND CPU,

please follow the steps below.

Before you insert the 775-LAND CPU into the socket, please check if

the CPU surface is unclean or if there is any bent pin on the socket.

Do not force to insert the CPU into the socket if above situation is

found. Otherwise, the CPU will be seriously damaged.

Step 1. Open the socket:

Step 1-1. Disengaging the lever by depressing

Step 1-2. Rotate the load lever to fully open po-

Step 1-3. Rotate the load plate to fully open po-

Step 2. Insert the 775-LAND CPU:

Step 2-1. Hold the CPU by the edges where are

Step 2-2. Orient the CPU with IHS (Integrated

Pin1

orientation

key notch

775-LAND CPU

8 8 8 8 8

down and out on the hook to clear

retention tab.

sition at approximately 135 degrees.

sition at approximately 100 degrees.

marked with black lines.

Heat Sink) up. Locate Pin1 and the two

orientation key notches.

orientation

key notch

ASRock 775V88/775V88+ Motherboard

775-Pin Socket Overview

Pin1

alignment key

775-Pin Socket

775v88+