Sofamel CIT-10 Manual De Instrucciones página 53

Function description
3.10. Timer function
The timer function can only be activated in the insulation test. Enable the TIMER function by
pressing TIMER (the meter display TIMER), the lock function will be invalid, and the meter starts the
insulation test when pressing the measure button. When the time is due, the test is stopped.
In timer mode, the display will be as following. The current voltage and time is shown on the secon-
dary display. The meter just display the test voltage when it is under the insulation test, to check the
time, please press button.
53