Marq GESTURE BEAM 400 Guia Del Usuario página 8

Menu Options
(continued)
Display Inverse
Settings
Auto-Off
Fixture Firmware
Information
Total Use Hours
Current Use Hours
Pan Calibration
Offset
Calibration
Tilt Calibration
Color Calibration
Gobo Calibration
Focus Calibration
Frost Calibration
Prism Insertion
Prism Rotation
Reset All
DMX Functions
You can control Gesture Beam 400 by linking it to a DMX controller. See below for charts of available
functions.
15-Channel Operation
Channel Function
Pan
1
Pan Fine
2
Tilt
3
Tilt Fine
4
Pan/Tilt Speed
5
Dimmer
6
7 Shutter
8

Invert control panel's display
On, Off Automatically turn off display when not in use
Currently installed firmware version
Total running time (HHHHH:MM)
Current use running time (HHHHH:MM)
-128 – +127 Offset for pan value
-128 – +127 Offset for tilt value
-128 – +127 Offset for color value
-128 – +127 Offset for gobo value
-128 – +127 Offset for motorized focus value
-128 – +127 Offset for frost effect value
-128 – +127 Offset for prism value
-128 – +127 Offset for prism indexing and rotation
OK, Cancel Restore all default settings
Value Description
000–255
Pan angle, 0° (000) to 540° (255)
000–255 Fine control of panning
000–255
Tilt angle, 0° (000) to 270° (255)
000–255 Fine control of tilting
000–255
Pan/tilt speed, fast (000) to slow (255)
000–255
Dimmer, dark (000) to bright (255)
000–003 Closed
004–007 Open
008–076
Strobe, slow (008) to fast (076)
077–145
Pulse, slow (077) to fast (145)
146–215
Random strobe, slow (146) to fast (215)
216–255 Open