Descargar Imprimir esta página

Waterdrop WD-AS13 Manual De Instrucciones página 7

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
Performance Data Sheet
Substance Reduction:
The system has been tested and certified by the IAPMO R&T International according to
NSF/ANSI Standard 42 for the reduction of the substances listed below. The concentration of
the indicated substances in water entering the system was reduced to a concentration less
than or equal to the permissible limit for the water leaving the system, as specified by
NSF/ANSI Standard 42. While testing was performed under standard laboratory conditions,
actual performance may vary.
Substance
Chlorine
Taste and Odor
Do not use with water that is microbiologically unsafe or of unknown water quality without
adequate disinfection before or after the system.
Limited Warranty
The Waterdrop Activated Carbon Block Faucet Filtration System ( Model No.: WD-AS13)
offers 1-year warranty, which covers defects in materials and workmanshop from original
date of purchase. If the products proves to be defective within 1 year from the date of
purchase, please call our technical support hotline.
During the warranty period, we will replace or repair any part which is deemed to be defective,
if product has not been subjected to tampering, alteration or improper use after delivery, and
has not been repaired by the manufacturer. The product is not warranted against misuse, use
in abbormal operation temperature conditions, conditions outside listed operating parameter,
sue in commercial operations or any other manner outside the "System Specifications" set
forth in the owner's manual. Our obligation does not include the cost of transportation. We
are not responsible for damage in transit, and claims for such damage should be presented
to the carrier by the customer.
NOTE: It does NOT apply to any filter cartridge, which has a life expectancy that varies based
on incoming water quality.
System Tested and Certified by IAPMO R&T against
NSF/ANSI 42 for the reduction of the claims specified on the
Performance Data Sheet, and NSF/ANSI 372 (≤0.25% lead).
NSF/ANSI Standard 42 – Aesthetic Effects
In uent Challenge
Concentration
2.0 mg/L
Percent
Product Water
Reduction
Concentration
97.63%
ND
U.S. EPA Level/NSF
Maximum Permissible
Product Water
Concentration
≥50%
5

Publicidad

loading