mnstaliation
mnstructions
MOVING THE REFRIGERATOR
[]
LOADING
THE RERIGERATOR
ONTO A HAND TRUCK
Leave all tape and door pads
on doors
until
the refrigerator
is in its final
location.
To move
the refrigerator,
use a padded
hand truck.
Center
the refrigerator
on the
hand truck
and secure
the strap
around
the refrigerator.
DO NOT OVERTIGHTEN
THE STRAP.
[] REMOVE THE BASE GRILLE
Remove
the grille
by removing
the two
Phillips
head screws.
If the refrigerator
must
go through
any entrance
that is less than
38"
wide,
the doors
must
be removed.
Proceed
to Step 3.
DO NOT remove
the handles.
If all entrances
are more
than
38" wide,
skip to Installing
the Refrigerator.
[]
DISCONNECT
THE WATER
COUPLING
(on some models)
If the refrigerator
has a water
dispenser,
there is a water
line from
the cabinet
into
the bottom
hinge
on the freezer
door
that
must
be disconnected.
To disconnect,
push
in on the white
collar
of the coupling
and pull out the tubing.
White collar
Bottom
freezer
hinge
17