Heart to Tail HC007B Manual Del Usuario página 9

− If the power cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
− Keep the power cord away from heated surfaces.
− Do not open the housing; instead, have a qualified
professional perform repairs. Contact a qualified
workshop for this. Liability and warranty claims are
waived in the event of repairs performed by the user,
improper connection or incorrect operation.
− Only parts that comply with the original device data
may be used for repairs. The clipper contains electrical
and mechanical parts which are essential for providing
protection against sources of danger.
− The clipper must not be operated with an external timer or
separate remote control system.
− Do not immerse the clipper or power cord in water or
other liquids.
− Never touch the power plug with wet or damp hands.
− Do not pull the power plug out of the outlet by the cord;
instead, always pull it out by the plug itself.
− Never move, pull, or carry the clipper by its power cord.
− Keep the clipper and power cord away from open flames
and hot surfaces.
− Lay the power cord so that it does not pose a tripping
hazard.
− Do not kink the power cord and do not lay it over sharp
edges.
− Only use the clipper indoors. Do not use the clipper in
damp rooms or in the rain.
− Do not use the clipper outdoors or operate where aerosol
(spray) products are being used or where oxygen is being
administered.
Safety
9