belavi 1222-USA Manual Del Usuario página 13

Assembly and use
Attach the leg
to the threaded sleeve
5
groove in the leg
and secure them in place using the screws
4
wArNiNG!
riSK oF DAMAGE!
When handling the fire bowl, wear appropriate protective gloves (with protection
against thermal hazards) which comply with DIN EN 407 (category II).
The heat protection plate must not be used as a shelf for firewood. It is designed
exclusively to shield the heat!
operation
• Please do not fill the fire bowl with more than 2 kg of firewood! After repeated use,
the fire bowl will begin to rust. This is not a fault, but rather an intended process.
• Please do not place the fire bowl on sensitive surfaces. Such surfaces could be
permanently stained by escaping water.
• PlEASE NoTE! National and local regulations – relating for example to permits, use,
safety distances, etc. – must be complied with.
16-1222-IM-WuK2023-PRINT-8.indd 13 16-1222-IM-WuK2023-PRINT-8.indd 13
to the designated threaded sleeve
3
. Insert the heat protection plate
4
. Now attach the two remaining legs
3
Operation / Assembly and use
in the bowl
4
into the designated
2
to the threaded sleeve
3
.
5
. Fix the screw
1
13
18.12.23 08:24 18.12.23 08:24