Greencut MNG Serie Manual De Instrucciones página 20

20
TECHNICAL DATA
Model
Length of the hose
Work pressure
Permissible temperature
Weight
NOTE: GREENCUT reserves the right to modify the technical characteristics without prior notice.
ASSEMBLY
Fix the metal bracket to the wall or ceiling on a wall or strong wooden surface with the screws.
1. To mount the hose, mark the holes corresponding to the holes in the wall bracket on the chosen surface.
2. If mounting on a wooden structure, drill four holes with a Ø3mm (Ø1/8in) masonry drill in the centres of
the holes located on the wall bracket.
3. If mounting on a wall, drill four holes with a Ø10mm (Ø3/8in) masonry drill at the centres of the holes in
the wall bracket and insert the plastic plugs with a hammer or mallet.
4. Fix the mounting bracket with four screws and washers to the wall or wood and make sure it is securely
fastened.
5. Connect the end of the hose to the water source.
Wooden installation
NOTE: It is recommended to install the mounting bracket at least 80cm from the floor.
HOSE
MNG100 / MNG200 / MNG300
10m / 20m / 30m
8bar
-5º a 45º
4Kg / 7Kg / 8,5Kg
3
(1 ")
45mm
4
3
120mm (4 ")
4
80cm (32")
(recommended)
(1 ") 3
45mm
4
120mm (4 ") 3
4
80cm (32")
(recommended)
Wall installation