Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
4. Put the 20 lb. propane gas tank (not
included) into the tank holder (F). Turn
the wing screw on the outside of the tank
holder (F) clockwise to tighten the tank into
the tank holder.
DANGER
Propane tank must be a minimum of 60
inches away at all times.
5. Turn the cylinder valve on the tank
clockwise to close the propane tank.
Attach the preassembled regulator from
the body to the cylinder valve by turning
the regulator coupling nut clockwise. Make
sure it is fastened securely and tighten
connections by hand only.
WARNING
Please inspect the rubber O ring in the
propane tank valve to ensure it is not worn
before attaching regulator. Worn rubber O
ring can cause leaks, explosions and serious
injury by propane tank.
6. Cover body (B) with lid (A). To lock lid (A)
in place, turn clockwise. To unlock, turn
counterclockwise.
CYLINDER VALVE
BLACK COUPLING NUT
turn clockwise to connect
REGULATOR
RUBBER O-RING
B
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
turn clockwise
to reseal
A
Page 8
Publicidad
