Descargar Imprimir esta página

Comelit SORTIES16A Manual Tecnico página 5

Módulo con 5 entradas y 4 salidas

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
Module on bus has 4 inputs + 1 scenario input, as well as 4 relay outputs with switching contact with independent common capable
of controlling resistive electrical loads up to 16A. For non-resistive loads, it is best to use a support contactor at each output.
Power supply voltage
Absorption
Inputs
Outputs
Loads controlled
Max. input cable length
Protection
Indications
Lack and restoring of power supply
Terminals
Positioning
Applicable standards
Approvals
Operating temperature
Storage temperature
Relative air humidity
Weight
Dimensions
* With access allowed only for support or servicing by qualified personnel.
• The module must be programmed vis the BUS line, using the SimpleHome/RS232 interface (20022611) and the
SimpleProg programming software.
• We recommend connecting continuously powered loads to the NC terminal.
• Specifications are subject to change without notice.
ART. 20046604
TECHNICAL CHARACTERISTICS
24 Vdc ± 5%
min. 5 mA, max. 140 mA
4+1, optically coupled digital type
4 relay 230 Vac, resistive 16A (cosϕ = 1)
Max. absorption per individual output:
resistive loads (cosϕ =1): 16A
LED bulbs: 100 W
electronic transformers: 100 W
230 VAC motors: 350 W - 16A
25 m
against reverse polarity
1 bus status indicator LED: when flashing, indicates data transmission via bus, when lit
steadily indicates lack of power supply negative or incorrect device connection.
5 input status indicator LEDs / 4 output status indicator LEDs
Output status memory
removable for BUS connection
On a DIN rail on a dedicated control panel or in junction boxes*
electromagnetic compatibility: EN 50081-1 (interference emission) and EN50082-2
(resistance to interference)
CE
0° to 50°C
-10° to +70°C
5 to 95% with no condensation
195 g (not including packaging)
71 x 90 x 58 mm (4 DIN modules)
d
+
-
-
BUS power supply negative
+
BUS power supply +24 Vdc
D
BUS data line
K
Common
V-
Support negative
V+
+24 Vdc support
I4
Input 4
I3
Input 3
I2
Input 2
I1
Input 1
IS
Multiple command (scenario)
NO1
Output 1 – NO contact
CONNECTION TERMINALS
C1
Output 1 – Common
NC1
Output 1 – NC contact
NO2
Output 2 – NO contact
C2
Output 2 – Common
NC2
Output 2 – NC contact
NO3
Output 3 – NO contact
C3
Output 3 – Common
NC3
Output 3 – NC contact
NO4
Output 4 – NO contact
C4
Output 4 – Common
NC4
Output 4 – NC contact
5

Publicidad

loading

Este manual también es adecuado para:

20046604