Units
Press the MODE button briefly to switch between grams (g), ounces (oz), and milliliters (ml) units.
Weigh
1. Turn on the spoon scale.
2. Fill the measuring spoon with the content to be weighed.
3. Keep the spoon scale level and steady, or place it on a flat surface.
4. If you want to display the measurement result permanently, press the HOLD button.
5. Empty the measuring spoon.
6. Before the new measurement, press the HOLD button.
Tare/Zero position
1. If 0 is not displayed after switching on, press "TARE" and the spoon scale switches to the zero position. Now
you can weigh the food in the spoon.
2. If you want to weigh food with a container, put the empty container into the spoon first. The spoon scale
shows the weight of the container. Now press "TARE" and the spoon scale will show 0. Now you can weigh
the weight of the food inside and the spoon scale will show you the net weight.
3. Press "TARE" again once you have removed the container and the scale will return to normal mode.
Error messages
Display
Disposal
Dispose of the device in accordance with the Electrical and Electronic Equipment Act (ElektroG) –
WEEE Directive ("Waste Electrical and Electronic Equipment") 2012/19/EU. If you have any
questions, please contact the local authority responsible for disposal. The used, completely
discharged batteries are to be disposed of via the marked collection containers, hazardous waste
collection points or via electronics retailers. You are required by law to dispose of batteries
according to your local
Note: Batteries and rechargeable batteries marked with the following letters include Pb = lead, Cd = cadmium, Hg
= mercury
Error Description
There is more than 30g weight in the measuring spoon when switched on.
If "UNST " is displayed after switching on, accurate measurement is not possible
because the scale is not in a level position or is not kept level.
"O_LD" will be displayed if the filled quantity exceeds the measurable maximum
weight of 500 g.
laws.
6
EN