Publicidad
Idiomas disponibles
Idiomas disponibles
ATTIRE:
Proper attire is essential to your safety. It is advised to utilize whatever
means necessary to protect eyes, ears, and skin. Additional safety attire
(such as respiratory mask) may be required when using detergent cleaning
agents with this heater module.
PRE-START INSPECTION PROCEDURES:
1. Before starting the unit, perform the following procedures:
a. Check all hose connections to ensure they are securely tightened.
b. Inspect for system water and oil leaks.
c. Check to ensure the voltage is on.
d. Inspect high pressure hoses for kinking, cuts and leaks. If a cut or
leak is found, DO NOT USE HOSE! Replace hose before starting unit.
See "Risk of Injection" warnings, pg. 7. Be sure that all damaged parts
are replaced and that the mechanical problems are corrected prior to
operation of the unit. If you require service, contact your Customer
Service Representative.
HOM-SERIES Hot Water Heater module Operator's Manual
PREPARATION
11
Publicidad
