Narwal Freo X Plus Manual Del Usuario página 5

1.4 Robot bu ons and indicators
Robot bu ons
Bu on Action
Start/Stop Short press
Press and hold for 2s
Recall Short press
Press and hold for 2s
Reset Short press
Press and hold for 5s
Press and hold for 10s
1) Robot indicators
O Breathing white
Shutdown or standby Standby
Breathing blue Breathing orange
Task paused Network configuring,
updating or resetting
2) Base station indicators
Fully charged or Not charging
base station
disconnected
Function
Start/pause/resume current task
Power on/o
Return to the base station
Child Lock on/o
Enter the pairing mode
Unbind the account and clear user data
Restore factory se ings
Steady blue
Task underway
Flashing red
Error
Charging Base station
failure
2. Get Ready before Use
Install the side brushes
Press side brushes into the slots as
indicated by color until they click into
place.
Remove the anti-collision foam
Open the robot top cover and remove the
anti-collision foam.
Place the base station
Plug in the power cord in the back of the
base station. Put the base station on
the flat and hard surface against the
wall and leave an open space of at least
1.0m in front of the base station for the
robot to enter and leave the base
station.
04