Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
Carefully remove all pieces from carton and
make sure that you have all parts listed (refer
to parts list on page 2-3).
If you are missing parts, please call GHP
customer service at 1-877-447-4768.
1. Set base (K) on a smooth, flat surface.
Insert 6 dowels (CC) into the predrilled holes in
the base (K) as shown. Insert dowels (CC) into
predrilled holes in each end of the front rail (L).
Slip left end of front rail (L) into predrilled holes
in top edge of left cabinet (H) until snug. Slip
right end of front rail (L) into predrilled holes
in top edge of right cabinet (J) until snug. Slip
front cabinet/rail assembly over dowels in base
(K) until snug. Secure with bolts (AA) and
washers (BB) inserted through predrilled holes
as shown.
2. Insert six dowels (CC) into predrilled holes
in top edge of assembly. Slip media shelf (G)
over dowels until snug. Secure from beneath
using bolts (AA) and washers (BB).
3. Insert six dowels (CC) into predrilled holes in
top of assembly. Slip upper left side panel (B)
over dowels on left side of assembly until snug.
Secure using bolts (AA) and washers (BB).
Repeat on right side using upper right side
panel (C). Slip back panel support (E) over
remaining dowels (CC).
1
CC
H
L
K
2
G
3
B
E
CC
4
AA
CC
J
CC
BB
AA
AA
BB
CC
C
BB
Publicidad
