Descargar Imprimir esta página

Zwilling Enfinigy PRO 53101-5 Manual De Instrucciones página 3

Ocultar thumbs Ver también para Enfinigy PRO 53101-5:

Publicidad

Idiomas disponibles

Idiomas disponibles

US
Only operate the appliance if the volt-
age stated on the rating plate matches
the voltage of your socket.
The appliance has a high power con-
sumption. For this reason, do not connect
the appliance to multiple sockets or
extension cables.
Make sure that the connection cable is
not kinked or pinched, and make sure
that the connection cable and the appli-
ance do not come in contact with heat
sources (e.g. stovetops, gas flames.)
When unplugging the power plug from
the socket, always unplug the power
plug directly. Do not carry the appliance
by the connection cable.
Never touch the power plug and the
base with wet hands.
Do not allow liquids to come into contact
with the base. Take the water container
off the base when filling it.
If the base comes into contact with liq-
uids, unplug the power plug, soak up the
liquid, and let the base dry.
Never touch the base with metal objects
when it is plugged in. Do not insert any
objects into the openings on the appli-
ance.
As long as the power plug is plugged in,
there is a voltage inside the appliance,
even if the appliance is switched off.
After every use and in the event of
danger or a defect, unplug the power
plug from the socket immediately. For this
www.zwilling.com
reason, keep the socket into which the
appliance is plugged easily accessible
at all times.
Unplug the appliance from the socket
prior to cleaning it.
Never unscrew the appliance and do
not make any technical modifications.
Never immerse the appliance in water
or other liquids, do not clean it under
running water, and never put it in the
dishwasher.
When the appliance is switched on,
there is a risk of scalding from boiling
water or hot steam:
Always guide the connection cable
through the cable bushing on the
underside of the base to ensure that the
appliance is stable.
Never fill the water container past the
MAX marking. Doing so can cause hot
water to spray out of the kettle.
Only switch the appliance on when the
lid of the water container is completely
closed.
Do not move or transport the appliance
while boiling is in process.
Never open the lid while the water is
boiling. Only open the lid when the hot
water has been completely poured out.
Never top up the water while the ap-
pliance is running. Hot steam emerges
during the boiling process. This is normal.
Keep away from the lid of the water
container while boiling is in process.
Safety
3

Publicidad

loading