Publicidad
Idiomas disponibles
Idiomas disponibles
The operation of any tiller can result in foreign objects thrown into the eyes,
which can result in severe eye damage. Always wear safety glasses or eye
shields before starting your tiller and while tilling. We recommendstandard
safety glasses or a wide vision safety mask worn over spectacles.
HOW TO USE YOUR TILLER
Know
how to operate
all controls
before
adding
fuel and oil or attempting
to start
engine.
STOPPING
TINES
AND
DRIVE
1.
Release
drive
control
bar to stop move-
ment.
2.
Move shift lever to "N" (neutral)
po-
sition.
ENGINE
Move throttle
control
to "STOP"
position.
If equipped
with stop switch,
move
switch
to "STOP"
position.
NOTE:
Never
use choke
to stop engine.
Drive Control Bar
"ENGAGED"
Position_
Shift Lever
Drive Control Bar
"DISENGAGED"
Position
Throttle Control
HARD
TO SHIFT
GEARS
Briefly
engage
drive control
bar and re-
lease
or rock tiller forward
and backward
until are able to shift gears.
DEPTH
STAKE
The depth
stake
can be raised
or lowered
to allow
you more versatile
tilling
and cul-
tivating,
or to more easily
transport
your
tiller.
Shallowest
Tilling
Deepest Tilling
Depth Stake ----
"" Transport Position
DRAG
STAKE
The drag stake
should
be raised
when
tilling
the counter
rotating
(_,) till position.
The drag stake
should
be lowered
when
tilling
in the forward
rotating
(_,) till posi-
tion.
TINE
OPERATION
= WITH
WHEEL
DRIVE
Always
release
drive
control
bar before
moving
shift
lever
into another
position.
Tine
movement
is achieved
by moving
shift lever to either
the counter
rotating
(_) till position
or the forward
rotating
(_) till position
and engaging
drive
con-
trol bar.
FORWARD
= WHEELS
ONLY/TINES
STOPPED
Release
drive control
bar and move shift
lever indicator
to "F" (forward)
position.
Engage
drive
control
bar and tiller will
move forward.
REVERSE
= WHEELS
ONLY/TINES
STOPPED
1.
DO NOT STAND
DIRECTLY
BEHIND
TILLER.
2.
Release
the drive control
bar.
3.
Move throttle
control
to "SLOW"
po-
sition.
4.
Move shift lever
indicator
to "R" (re-
verse)
position.
5.
Hold drive control
bar against
the
handle
to start tiller movement.
/
Lowered
(Forward Rotating till)
Raised
(Counter rotating till)
TILLING
NOTE:
Use the counter
rotating
tine drive
when
tilling
hard or rockey
soil, virgin
ground
or sod.
1.
Release
depth
stake
and drag stake
pins.
Pull the depth
stake
up for
increased
tilling
depth.
Raise the drag
stake.
Place
proper
pin in hole of depth
stake
or drag stake
to lock in position.
2.
Place
shift lever
indicator
in counter
rotating
(_) till position.
3.
Hold the drive control
bar against
the
handle
to start tilling
movement.
Tines
and wheels
will both turn.
9
Publicidad
