Matco Tools MTC1214ID Instrucciones De Operación

ATORNILLADOR ELÉCTRICO 1/4" DE IONES DE LITIO 12V
12V
CLÉ À CHOCS 1/4" 12V LITHIUM-ION
Operating Instructions • Warning Information • Parts Breakdown
Blows Per Minute ......................................................2300
Drive Size ................................................................. 1/4"
Max Torque ......................................................... 50 ft/lbs
Overall Length .......................................................... 6.2"
Weight (Tool With Battery) ......................................... 2 lbs.
WARNING
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
ALWAYS WEAR
HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
MTC1214ID
LITHIUM-ION
1/4" IMPACT DRIVER
S P E C I F I C A T I O N S
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
Height (Tool With Battery) ........................................... 7.5"
Battery Type .................................................... 12V Li-ion
Charging Time ..................................................< 60 min.
Compatible Battery ....................MUC122LB, MTC1215LB
Compatible Charger ........................MUC12LC, MCLCHRG
WARNING
Copyright © Professional Tool Products, 2014
1
MTC1214ID
MTC1214ID
All rights reserved.
10/30/14