Publicidad
Idiomas disponibles
Idiomas disponibles
USER SERVICING INSTRUCTIONS
1.
Grasp plug and remove from the receptacle or other outlet device. Do not
unplug by pulling on cord.
2.
Open fuse cover. Slide open fuse access cover on top of attachment plug
towards blades.
3.
Remove fuse carefully. Insert the tip of your tool into fuse slot (close with
the terminal), then prize the fuse gradually and slowly, but not overexert.
If you feel tight, you can try it at several times and prize the fuse little by
little. When one side of the fuse has been prized, then you can get the fuse
out entirely.
4.
Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse.
5.
Close fuse cover. Slide closed the fuse access cover on top of attachment
plug.
6.
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse)
that should not be removed. Discard product if the attachment plug is
damaged.
MISTING NOZZLE MAINTENANCE
If the misting nozzles become clogged, unscrew them from the fan grille and
soak in vinegar or a lime scale remover until they are clear of buildup. Use a
non-metallic brush to scrub them if necessary. If the nozzles remain obstructed,
contact customer service for replacement.
Warning: never try to clear the nozzles with pins or other sharp objects as this
can cause damage to the nozzles, affecting their efficiency.
If the misting hose valve becomes clogged, unscrew the head of the valve and
flush it with running water to clear debris. Make sure the screen inside the
misting hose is clean as well.
www.newair.com
EN
14
Publicidad
