Nexigo Iris Manual Del Usuario página 21

10. OSD Information / Home Button
Outside of the OSD menu, you can press this button once to enter the Information page in
the OSD. While in the OSD menu, this serves as the "OK" button.
Press and hold this button for at least two seconds to reset the video capture view to the
default position.
11. Preset / AI Sensitivity Button
This Button can serve two functions:
The first function is framing presets. With auto framing and auto tracking off, adjust the
zoom, pan, and tilt to your desired position. Then press the Preset button once to enter the
preset settings mode, and press one of the numbered buttons to set the preset to that
number. Presets can be used for numbers 0-6. To recall a preset, simply press its corresponding
number. After the new preset is saved, it will override any previously saved presets on this
button. It's important to mention that presets will not save your light or color settings, only pan,
tilt, and zoom.
The second function is changing AI sensitivity. When auto framing or auto tracking are
enabled, tap the preset button to change the AI sensitivity to low, medium, or high.
EN 18 US 01