Publicidad
Idiomas disponibles
Idiomas disponibles
Wear eye protection
Wear ear protection
Wear dust mask
Keep hands away from blade
Keep sufficient distance away from
electrical power lines
Wear head protection
Wear protective gloves
Li-Ion battery, battery must be recycled
Do not burn
Batteries may enter water cycle if
disposed improperly, which can
be hazardous for ecosystem. Do
not dispose of waste batteries as
unsorted municipal waste.
POSITEC Inc. has established a partnership with
the RBRC Corporation to recycle any Positec
batteries with the RBRC-call2recycle seal. For
environmental protection, please do not discard
batteries in the trash. After the batteries' life cycle
is ended, then please call 1-800-822-8837 for
a free service that will properly dispose of the
battery.
ASSEMBLY & OPERATION
NOTE: Before using the tool, read the
instruction book carefully.
BEFORE OPERATION:
Assembling the Cutting Attachment (See
Fig. A1, A2)
A
A1
2
A
A2
Attach the cutting attachment to the pole, making
sure that the cutting attachment completely covers
the white part of the label. Tighten the screws.
NOTE:
Please keep the blade vertically facing
upwards.
Assembling and disassembling the Power
head attachment. (See Fig. B1, B2, B3)
1. Remove the protective cap from the end of the
attachment shaft.
2. To assemble, align the triangle icon on the button
with the arrow label on the attachment shaft.
3. Push the shafts together until you hear a "click".
The edge of the arrow label should be close to
the shaft connection housing.(Note: If the hedge
trimmer attachment cannot be fully installed
into the power head, rotate the hedge trimmer
attachment a little until it is possible to insert the
1
EN
7
Publicidad
