Temper KOBAN K KMPC-01-50A Manual página 36

5.3.4. Test current can select 1A-5A gears inuput current, click the up and down allow to select
differnt input current.
5.3.5. After finish the selection of frequecy, test mode and the input current gear, can press the Start
key to start the testing, the testing interface as follow:
When finidh the testing, will display the tester result, and can click "SAVE" key to save the testing
result directly with dafult or click "SAVEAS" key to input the record file name, as well as can click
"PRINT" key to print out the test result, the tester equip with the printer
5.3.6. After finish the testing, click "BACK" key return back the function selection interface, click
"Query" key enter into access store test record interface, select the different test record (selected
and display red dot) and check the detail tested result.
5.3.7. In the function selection interface, click "time set" key to set the time.
7