Thrustmaster AVA Manual Del Usuario página 16

Installation on a cockpit* or another
fixed support*
To attach the AVA base to a cockpit* or a desk support*,
use four of the eight screw threads located on the
underside of the base. Use four M4 screws with a
maximum length of 10 mm (not included), so as not to
damage the base.
You can also use the four perforations located in the
corners of the AVA Desktop Plate plate** to install the
AVA base and its plate on a wide fixed support.
− Make sure that the screws do not extend more than
8 mm inside the base.
− To avoid damaging the AVA base, please consult
the cockpit manufacturer or technical support in
order to determine the cockpit's compatibility with
Thrustmaster products.
*Not included / **Sold separately
15