Adler europe AD 1199 Manual De Uso página 4

11.Never use the product close to combustibles.
12.Do not let cord hang over edge of counter or touch hot surfaces.
13.Never leave the product connected to the power source without supervision.
Even when use is interrupted for a short time, turn it off from the network, unplug
the power.
14.In order to provide additional protection, it is recommended to install residue
current device (RCD) in the power circuit, with residual current rating not more
than 30 mA. Contact professional electrician in this matter.
15. Avoid getting the radio wet.
Device description Karaoke speaker:
Control Panel:
C1. On/Off / Disconnect button
C5. Minus button
Microphone:
M1. On/Off / Play / Pause Button
Microphone button
Main body:
B1. Light B2. USB Charging Port
B5. AUX port
First setup:
1. remove all package material
2. Charge the device using the USB cable and connect it to the USB charging port (B2) at the back of the device.
3. Turn on the device using the On off button (C1) on top of the device.
4. Turn on your transmitting device such as an Smartphone or tablet.
5. Connect your transmitting device by using the Bluetooth connection and pairing the speaker. Find AD 1199 and press
pair on your transmitting device.
6. Turn on the microphone by pressing and holding the On / OFF button (M1) for 3 seconds
7. You have set up the device and it is ready to use.
Switching modes:
The device can use 4 voice modulations and original voice.
1. Baby voice
4. Robot voice
Press the Modes button (M5) to switch between the modes.
Using the device:
Basic use:
1. Turn on the device by pressing and holding the On / Off button (C1).
2. Connect your transmitting device.
3. Turn on the microphone by pressing the On Off button (M1) on the microphone.
4. Change the voice modulation (M4) to the one you want.
5. You can play music from the transmitting device, and Start / pause (C1) the music on the device. Or short press the On
/ Off button on the microphone (M1), Make the music louder or quieter using the + / - buttons on the device (C4, C5).
6. To change the volume level of your singing / talking voice you can use the + / - on the microphone (M2, M3).
7. During use you can also change the type of voice modulation using the M5 button on the microphone.
8. To turn off the device press the On / Off button (C1) for 3 seconds
Device buttons use and description:
On off Mode button (C1)
Long press 3 seconds : Power On / Off the device
Short press: Switch between input modes : Bluetooth, USB, SD card, AUX.
Double press: Disconnect Bluetooth connection (Wont connect automatically / reconnect) double press again to connect
to your device again.
Play pause button (C2)
Short press play, pause music from transmitting device.
Minus / Plus buttons (C5,C4)
C2. Play / Pause button C3. Lights settings button
M2. Plus button M3. Minus button
B3. SD card port
2. Deep voice
5. Original voice.
4
C4. Plus button
M4. Mode button
B4. USB playback port
3. Feminine voice
M5.